Chest freezer -18 ÷ -22 C ° | 168L | 122W | 780x695x (H) 840mm

Chest freezer -18 ÷ -22 C ° | 168L | 122W | 780x695x (H) 840mm

The chest freezer is designed for freezing and storing frozen foods and ice cream in warehouses or in the back. The chest freezers produced by us have a similar type of reinforced freezer construction compared to household appliances and a more powerful refrigeration system. All this with a view to the method of use and intended use of the equipment. The housing is made of PVC laminated sheet, resistant to scratches and corrosion. We also make freezers made of stainless steel.

Technical Specifications:

dimensions:

Data for transport:

MODIFICATIONS AND ADDITIONAL EQUIPMENT

• An electronic thermometer with a liquid crystal display is permanently mounted on the equipment. Powered from a microbattery with a shelf life of about 2 years. Indicates an approximate ± 2 ° C stabilized air temperature at the load level.
• The electronic controller built-in permanently to the equipment replaces the thermostat and allows you to set the desired temperature in the range acceptable for a given type of equipment, and indicates continuously stabilized air temperature with an accuracy of ± 2oC. In addition, it protects the compressor against overloads.
• Mechanical lock with removable key mounted on the glass or in the handle of the freezer.
• Internal lighting placed in the freezer compartment can be fixed permanently on the back or front wall. It consists of a special power supply and a watertight strip with white or colored LEDs, placed in a special profile. There is a lighting switch on the front wall of the freezer. In chest freezers with cover, lighting in the form of a stylized LED bulb is located on the inside of the damper and is activated by an inertial switch when opening the damper.
• To the above-mentioned extension, you can mount in the upper part in a special profile lighting type: furniture fluorescent LED strip
• The internal fan is used in refrigeration equipment to prevent freezing of products at the bottom of the chamber.
• The water drain from defrosting the freezer can be made to order. It is recommended in freezers operating in rooms with high humidity and frequency of opening.
• Contaminated water drainage is used in cooling equipment when storing products in the cooling chamber from which contaminated liquids leak. Discharge of contaminated water can be carried out to drains or special containers.
• Even on small series, we make advertising imprints on the housing in UV printing technology.
• Adaptation of equipment to work in the range of -35oC ÷ + 10oC.
• wheels with brakes or reinforced
• A strip for price lists fastened to the back of the freezer
• Additional baffles of small and large baskets. Freezer compartment dividers
• Baskets for the whole chamber (deep). They protect against freezing of products to the walls
• Protective strips to protect the equipment against bagging by shopping trolleys
• Additional ventilation of the compressor chamber is necessary when it is necessary to cover the ventilation grids
• Adaptation to the cuvettes:
  • with glass nadystak and basket for GN litter box
  • with holes in the cover for round cuvettes
• Adjusting the height of the equipment to the assumptions of the ordering party.
• Equipment made of stainless or acid-proof steel
• For working in other ambient conditions. Adaptation of equipment to work in low or high ambient temperature and high relative humidity.
• Increased freezing capacity. With this option, the refrigeration system is strengthened and a special controller with a temperature display and FAST FREEZE function is used.
• Adaptation for mobile applications
• Possibility of powering from mobile energy sources